Triple Convolution Air Spring

Air springs produced by a German producer “Contitech“- it is an easy to mount, rigid, and cost-efficient measure that is employed for lifting and diminishing of vibration. With reference to a wide selection of different models, these air springs may be applied even for the most complex industrial equipment.

  • Load capacity of air springs ranges from 0.5 kN to 440 kN, while lifting height is up to 450 mm.
  • Specific oscillation frequency ranges from 0.5 Hz to 3.5 Hz. Permissible load varies from 0.5 kN to more than 440 kN.

Use of air springs for lifting: tension mechanisms, motor vehicles, gluing, moulding, and other presses, stamps, expanders, conveyors, juice extraction presses, pneumatic jackscrews, scissor lifts, and other lifting equipment, label gluing and packaging equipment, amusement park attractions, and other.

Use of air springs for diminishing of vibration: compressors, motors, textile machines, loading points of conveyors, in vibro-conveyors of large-scale drying machines, centrifuges, commercial washing machines, and control panels.

Catalogue online

 

 

Type

 

 

Min. installation height (mm)

 

 

Max. diameter (mm)

 

 

Required clearance (mm)

 

 

Max. recommended stroke (mm)

 

 

Max. stroke (mm)

Force with Vibro isolation
p = 8 bar
Min. stroke (kN) Half stroke (kN) Max. stroke (kN)

Rec. height for vibration(mm)

Max. force (load) at rec. operating height and 8 bar (kN) Natural frequency at rec. operating height and 8 bar (Hz)
FT 330-29CI* 110 325 345 285 320 46.4 33.7 17.8 - - -
FT 430-32CI* 115 330 355 265 315 53.4 39.2 17.0 - - -
FT 530-32CI* 110 384 410 275 325 69.3 54.6 24.7 - - -
FT 530-35CI* 115 405 430 335 395 77.0 53.8 27.2 - - -
FT 960-34CI* 120 462 510 290 335 99.9 77.2 32.0 - - -
FT 1330-35CI* 120 521 570 290 350 148.2 119.6 26.3**** - - -
Call Us Contact us